Assembly |
| |
| （Continued） |
|
5 | Turn on the power and raise the backrest to the upright position. | |
Insert the power plug into the | ❶● | |
| ❶● power outlet. | |
●Always be sure to insert into an AC 120 V plug.
❷● Confirm the lock switch key is set to the“open”position.
❸● Confirm the power switch is |
| |
set to the“on”position. |
| |
●❹ Press | ●❷ | ❸● |
on the controller twice. |
| |
●Press once, and then press again approx. 1 second later. |
| |
rest will rise automatically. |
| |
6 | Placing the controller |
|
●❶ Placing the controller | ●❶ | |
| into e controller |
|
stand.
❷● Fasten the controller cord sing the clip.
●Fasten so the cable under the clip will not sag too much with the backrest raised.
(Because there is a chance of the cord becoming tangled with your feet, etc.)
❷●
EN18
