Setting up the massage lounger
1 Where to use the unit
●Ensure there is adequate space to recline.
Keep at least 10 cm (3.9 in.) away from the wall.
Approx. 202 cm (79.5 in.)
Width approx. | Approx. 30 cm | |
90 cm (35.4 in.) | ||
(11.8 in.) | ||
Approx. 49 cm |
| |
(19.3 in.) |
|
● For details on the dimensions of the unit, see page EN9.
Mat Area where leg rest | Area where unit |
could touch the floor | touches the floor |
● Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of |
heating sources, because this can cause discoloration or hardening of the synthetic leather. |
● Place the unit on a mat to prevent floor damage. When placing a mat under the unit, the size of |
the mat should be sufficient (at least 120 cm × 70 cm (47.2 in. × 27.6 in.)) to cover the areas |
where the unit touches and where the leg rest could touch the floor, as shown in the diagram |
on the above. |
● Install the unit near a power outlet. |
2 Confirm that the main unit and the accessories are in the box. |
Main unit
Controller
Accessories ●Pillow
●Armrests (Right/Left)
●Comfort cushion
●Allen key — 1 ●Attachment screws
| (M6 × 13) — Black | |
| (4 pcs.) | |
(M6 × 20) — Silver | ||
|
| |
4 mm |
| (2 pcs.) |
●Controller stand
Right/Left indication |
|
| Controller | ●Lock switch key |
|
| holder | ||
(Back of the armrest) |
|
|
| |
|
|
|
| |
The holes in the fabric |
|
|
|
|
at the back of the | ●Power |
| Controller | |
hand & arm massage | cord | holder fixing | ||
section are due to |
|
| screw | This is initially inserted |
the manufacturing |
|
| Clip | in the lock switch of the |
process and are not a |
|
|
| power switch section |
fault. |
|
|
| prior to leaving the |
|
|
| factory. | |
|
|
|
| |
EN14
