Assembly
Attaching the controller stand to the right or left side panel of this unit | |||
1Fasten the controller stand with the | <When attaching on the right side panel> | ||
attachment screws. (4 positions) |
|
| |
Use this screw … Attachment screws (M6 × 13) |
|
| |
× 4 pcs. (Black) |
|
| |
How to tighten the screws | ●Align the 2 prongs of the |
| |
Attachment screw |
| Controller | |
Hole | ●Tighten the 4 screws | side panel with the holes | Stand |
lightly using your fingers. | of the controller stand. |
| |
|
| ||
| (Make the screws level |
|
|
| with the holes.) |
|
|
Allen key | ●Tighten firmly with the allen key. |
|
|
| ●Screw may be damaged if |
|
|
| you tighten the screw inserted |
|
|
| into the hole crookedly using |
|
|
| an allen key. |
|
|
2 | Fasten the armrest with the attachment screws. (On both the right and left sides) | |||
❶● | Insert the armrest into the unit. | <When attaching the right armrest> | ||
| ●“R” right side) and“L”(left side) are indicated | ●❶ | Front | |
|
| at the bottom of the armrest. |
| |
●Insert the armrest from the top aligning the ▲ marks on the side of the armrest.
●Be careful to avoid pinching your fingers and air plugs.
❷● Slide the armrest toward the back while pushing it downward.
Back
●❸ Fasten the armrest with the attachment |
| |
screws. (One position for each side) | Align the ▲ | |
Use this screw … Attachment screws (M6 × 20) | marks. | |
| × 2 pcs. (Silver) |
|
How to tighten the screws | ●❷ | |
| ●Put an attachment screw |
|
| on the edge of the allen | ❸● |
Allen key | key and tighten the screw | |
| horizontally to the hole. | |
| ●Screw may be damaged |
|
| if you tighten the screw |
|
| inserted into the hole |
|
| crookedly using an allen key. |
|
EN16
