Removal and Replacement Procedures

8.Turn the tablet PC panel side up with the power switch and jog dial facing you.

9.Lift and hold the front edge of the base enclosure 1 until it rests at a 45-degree angle (Figure 5-11).

10.Release the ZIF connector 2 to which the inverter cable is attached and disconnect the cable 3.

11.Lift the base enclosure straight up 4 to remove it from the display panel assembly.

Figure 5-11. Removing the Display Panel Assembly

Maintenance and Service Guide

5–15

Page 105
Image 105
Compaq TC1000 manual Removing the Display Panel Assembly