Removal and Replacement Procedures

6.Remove the hard drive by following these steps:

a.Turn the tablet PC panel side down with the power switch and jog dial facing you.

b.Remove the two PM2.0 × 4.0 screws 1 that secure the hard drive cover to the tablet PC (Figure 5-6).

c.Lift the front edge of the cover up and swing the cover back 2.

d.Remove the hard drive cover.

The hard drive cover is included in the Miscellaneous Plastics/Hardware kit, spare part number 310678-001.

Figure 5-6. Removing the Hard Drive Cover

Maintenance and Service Guide

5–9

Page 99
Image 99
Compaq TC1000 manual Removing the Hard Drive Cover