Compaq TC1000 manual Removing the Digitizer Cable

Removal and Replacement Procedures

5.7Digitizer Cable

✎The digitizer cable is included in the Miscellaneous Cable Kit, spare part number 310673-001.

Perform the following steps to remove the digitizer cable:

1.Prepare the tablet PC for disassembly (Section 5.3).

2.Remove the display panel assembly (Section 5.5).

3.Disconnect the digitizer cable 1 from the system board (Figure 5-19).

4.Remove the digitizer cable from the clips in the heat sink 2.

5.Remove the digitizer cable from the base enclosure 3.

Figure 5-19. Removing the Digitizer Cable

Reverse the preceding procedures to install the digitizer cable.

Maintenance and Service Guide 5–23