Basic playback

0404

Chapter 4:

Basic playback

Playing a source

Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system.

 

AUTO/

 

ALC/

BD MENU

 

DIRECT

STEREO STANDARD

ADV SURR

RECEIVER SLEEP SOURCE

TV

 

 

 

CONTROL

 

 

MASTER

 

AUDIO

 

TUNER EDIT

 

PARAMETER

 

TOOLS

VOLUME

RECEIVER INPUT SELECT

TOP

TUNE

MENU

 

 

 

MENU

 

 

 

 

INPUT

 

 

 

BD

DVD

TV

T

 

P

E

 

R

 

 

 

S

ENTER

E

 

 

 

E

S

 

 

 

P

 

E

 

 

 

R

 

T

 

 

 

 

 

DVR/BDR

CD

CD-R

CH

 

 

 

 

 

HOME

 

 

 

 

 

MENU

TUNE

 

 

 

 

SETUP

BAND

ADAPTER iPod USB

VIDEO1

iPod CTRL

 

RETURN

CATEGORY

DTV/ TV MUTE

 

 

 

 

 

VIDEO2

TUNER

SIRIUS

VOL

 

 

 

 

 

 

BASS

TRE

1Switch on your system components and receiver.

Start by switching on the playback component (for example a DVD player), your TV and subwoofer (if you have one), then the receiver (press RECEIVER).

• Make sure the setup microphone is disconnected.

2Switch the TV input to the input that connects this receiver.

For example, if you connected this receiver to the VIDEO jacks on your TV, make sure that the VIDEO input is now selected.

3Press input function buttons to select the input function you want to play.

•The input of the receiver will switch over, and you will be able to operate other components using the remote control. To operate the receiver, first press RECEIVER on the remote control, then press the appropriate button to operate.

•The input source can also be selected by using INPUT

SELECT buttons on the remote control, or by using the front panel INPUT SELECTOR dial. In this case, the remote control won’t switch operational modes.

If you selected the proper input source and there is still no sound, select the audio input signal for playback (see Selecting the audio input signal below).

4Press AUTO/DIRECT to select ‘AUTO SURROUND’ and start playback of the source.

If you’re playing a Dolby Digital or DTS surround sound DVD disc, with a digital audio connection, you should hear surround sound. If you’re playing a stereo source or if the connection is an analog audio connection, you will only hear sound from the front left/right speakers in the default listening mode.

It is possible to check on the front panel display whether or not surround sound playback is being performed properly. When using a surround back speaker, 2D+PLIIx is displayed when playing Dolby Digital 5.1-channel signals, and DTS+NEO:6 is displayed when playing DTS 5.1-channel signals.

When not using a surround back speaker, 2D is displayed when playing Dolby Digital signals.

If the display does not correspond to the input signal and listening mode, check the connections and settings.

Note

•You may need to check the digital audio output settings on your DVD player or digital satellite receiver. It should be set to output Dolby Digital, DTS and 88.2 kHz/96 kHz PCM (2 channel) audio, and if there is an MPEG audio option, set this to convert the MPEG audio to PCM.

•Depending on your DVD player or source discs, you may only get digital 2 channel stereo and analog sound. In this case, the receiver must be set to a multichannel listening mode if you want multichannel surround sound.

5Use MASTER VOLUME to adjust the volume level. Turn down the volume of your TV so that all sound is coming from the speakers connected to this receiver.

Selecting the audio input signal

 

 

 

English

Once it is set, the audio input that was selected will be

The audio input signal can be selected for each input source.

 

applied whenever you select the input source using the input

 

function buttons.

 

 

 

 

Español

 

7

8

9

CH

 

S.RETRIEVER SB CH

CH SELECT

EQ

 

 

4

5

6

CH

 

TV

MIDNIGHT SPEAKERS

LEV

PHASE

 

RECEIVER SLEEP SOURCE CONTROL

 

 

 

 

 

 

DIMMER SIGNAL SEL

LEV

SHIFT

 

RECEIVER INPUT SELECT

CLR

0

ENTER

 

 

INPUT

/ +10

 

 

 

 

 

D.ACCESS

 

 

 

 

Press RECEIVER , then press SIGNAL SEL to select the audio input signal corresponding to the source component. Each press cycles through the following:

•H – Selects an HDMI signal. H can be selected for BD, DVD, DVR/BDR or VIDEO1 input. For other inputs, H cannot be selected.

-When the HDMI option in Setting the Audio options on page 35 is set to THRU, the sound will be heard through your TV, not from this receiver.

•A – Selects the analog inputs.

•C1/O1/O2 – Selects the digital input. The coaxial 1 input is selected for C1, and the optical 1 or 2 audio input is selected for O1 or O2.

When H (HDMI) or C1/O1/O2 (digital) is selected and the selected audio input is not provided, A (analog) is automatically selected.

Note

•VIDEO1 input is fixed to H (HDMI). It cannot be changed.

•For the TV/SAT input, only A (analog) or C1/O1/O2 (digital) can be selected. However, if the ARC at HDMI Setup is set to ON, the input is fixed to H (HDMI) and cannot be changed.

•When set to H (HDMI) or C1/O1/O2 (digital), 2lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.

•When the H (HDMI) is selected, the A and DIGITAL indicators are off (see page 7).

25

En