Controls and displays | 0101 |
10Listening mode buttons
AUTO SURROUND/STREAM DIRECT – Switches between Auto surround mode (page 32) and Stream Direct playback (page 33).
ALC/STANDARD SURR – Press for standard decoding and to switch between the modes of 2Pro Logic II, 2 Pro Logic IIx, 2Pro Logic IIz and NEO:6, and the Auto level control stereo mode (page 32).
ADVANCED SURROUND – Switches between the various surround modes (page 33).
11MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC setup (page 23).
12 AUDIO/VIDEO input terminal
See Connecting to the front panel video terminal on page 21.
13 iPod iPhone iPad/USB terminal
Use to connect your Apple iPod or USB mass storage device as an audio source (page 21).
14 SOUND RETRIEVER AIR
When the button is pressed, the input switches to ADAPTER and the listening mode is automatically set to S.R AIR (page 29).
15 iPod iPhone iPad DIRECT CONTROL
Change the receiver’s input to the iPod and enable iPod operations on the iPod (page 27).
Display
16 PHASE
Lights when the Phase Control is switched on (page 34).
17 AUTO
Lights when the Auto Surround feature is switched on (page 32).
18Tuner/SIRIUS indicators
ST – Lights when a stereo FM broadcast is being received in auto stereo mode (page 31).
TUNE – Lights when a normal broadcast channel or SIRIUS channel is being received.
PRESET – Shows when a preset radio station is registered or called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing the currently received AM/FM broadcast frequency.
19 Speaker indicators
Indicates the speaker terminal, A and/or B, to which audio signal output is currently set (page 12).
20 Sleep timer indicator
Lights when the receiver is in sleep mode (page 8).
21PRESET information or input signal indicator Shows the preset number of the tuner or the input signal type, etc.
22Character display
Displays various system information.
23DTS indicators
DTS – Lights when a source with DTS encoded audio signals is detected.
HD – Lights when a source with
ES – Lights to indicate
96/24 – Lights when a source with DTS 96/24 encoded audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is on, this lights to indicate NEO:6 processing (page 32).
24Dolby Digital indicators
2D – Lights when a Dolby Digital encoded signal is detected.
2D+ – Lights when a source with Dolby Digital Plus encoded audio signals is detected.
2HD – Lights when a source with Dolby TrueHD encoded audio signals is detected.
EX – Lights to indicate Dolby Digital EX decoding.
2PLII(x) – Lights to indicate 2Pro Logic II/2Pro Logic IIx decoding. Light will go off during 2Pro Logic IIz decoding (see Listening in surround sound on page 32 for more on this).
25ADV.S.
Lights when one of the Advanced Surround modes has been selected (see Using the Advanced surround on page 33 for more on this).
26SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected. Blinks when a digital audio signal is selected and selected audio input is not provided.
HDMI – Lights when an HDMI signal is selected. Blinks when an HDMI signal is selected and selected HDMI input is not provided.
27Up Mix/DIMMER indicator
Lights when the Up Mix function is set to ON (page 34). Also, lights when DIMMER is set to off.
28 DIR.
Lights when the DIRECT or PURE DIRECT mode is switched on (page 33).
Español English
7
En