The System Setup menu
0606
Aspect
Specifies the aspect ratio when analog video input signals are output at the HDMI OUT terminal. Make your desired settings while checking each setting on your display (if the image doesn’t match your monitor type, cropping or black bands appear).
1Select ‘Video Parameter’ from the System Setup menu.
2Select ‘Aspect’ from the Video Parameter menu.
5.Video Parameter | 5c.Aspect |
|
| ||
|
|
|
|
| |
| a.Video Converter | DVR/BDR | NORMAL | ||
| b.Resolution | DVD | [THROUGH] | ||
| c.Aspect |
| BD | [THROUGH] | |
|
|
| VIDEO1 | [ NORMAL ] | |
| Return |
| Return | ||
3Select desired output aspect ratio.
•THROUGH – The input video signal is output unchanged.
•NORMAL – Black bands will appear either at top and bottom or on both sides.
4When you’re finished, press RETURN.
You return to the Video Parameter menu.
Note
•If the image doesn’t match your monitor type, adjust the aspect ratio on the source component or on the monitor.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time has passed (when the power has been on with no operation for several hours.
• Default setting: OFF
1Select ‘Auto Power Down’ from the System Setup menu.
System Setup | 7.Auto Power Down | ||||
| 1.Auto MCACC |
|
|
| |
|
| OFF | |||
| 2.Manual SP Setup |
|
|
| |
| 3.Input Assign |
|
|
| |
| 4.Speaker System |
|
|
| |
| 5.Video Parameter |
|
|
| |
| 6.HDMI Setup |
|
|
| |
| 7.Auto Power Down |
|
|
|
|
| 8.FL Demo Mode |
|
|
|
|
| Return |
|
| Return | |
2Specify the amount of time to allow before the power is turned off (when there has been no operation).
•You can select 2, 4 or 6 hours, or OFF (if no automatic shutoff is desired).
3When you’re finished, press RETURN.
You return to the System Setup menu.
The FL Demo Mode menu
Set whether or not various demos are to be shown on the front panel display.
1Select ‘FL Demo Mode’ from the System Setup menu.
System Setup | 8.FL Demo Mode |
|
| |||
| 1.Auto MCACC | FL Demo |
|
|
| |
|
| ON | ||||
| 2.Manual SP Setup |
|
|
|
| |
| 3.Input Assign |
|
|
|
| |
| 4.Speaker System |
|
|
|
| |
| 5.Video Parameter |
|
|
|
| |
| 6.HDMI Setup |
|
|
|
| |
| 7.Auto Power Down |
|
|
|
| |
| 8.FL Demo Mode |
|
|
|
|
|
| Return |
|
|
| Return | |
2Choose ON or OFF for the demo display.
3When you’re finished, press RETURN. You return to the System Setup menu.
Español English
41
En