06The System Setup menu

The Speaker System setting

Specify either using the surround back speaker (or the speaker B), or the front height speaker connection with the B- speaker terminals.

• Default setting: Surr. Back

1 Select ‘Speaker System’ from the System Setup menu.

System Setup

4.Speaker System

 

1.Auto MCACC

SP System

 

 

 

Surr. Back

 

2.Manual SP Setup

 

 

 

 

3.Input Assign

 

 

 

 

4.Speaker System

 

 

 

 

 

5.Video Parameter

 

 

 

 

 

6.HDMI Setup

 

 

 

 

7.Auto Power Down

 

 

 

 

8.FL Demo Mode

 

 

 

 

Return

 

Return

2Select the speaker system setting using /.

•Surr. Back – Sound is output from the surround back speaker or the speaker B.

•Height – Sound is output from front height speaker.

3When you’re finished, press RETURN.

You return to the System Setup menu.

The Video Parameter setting

This receiver can up-convert the video signal input from the composite/component video terminals; the output is from the HDMI OUT terminal. The following shows the various settings for this function.

Video Converter

This setting specifies valid/invalid for the function that converts the input video signal from each composite/ component video terminal. When OFF is selected, Resolution and Aspect can not be set.

1Select ‘Video Parameter’ from the System Setup menu.

2Select ‘Video Converter’ from the Video Parameter menu.

5.Video Parameter

5a.Video Converter

 

 

 

 

 

 

 

 

 

 

 

 

 

a.Video Converter

 

DVR/BDR

 

 

ON

 

 

 

 

 

 

 

 

 

 

b.Resolution

 

DVD

[

 

OFF

]

 

c.Aspect

BD

[

 

OFF

]

 

 

 

VIDEO1

[

 

OFF

]

 

Return

 

 

 

 

Return

Resolution

Specifies the output resolution of the video signal (when video input signals are output at the HDMI OUT terminal, select this according to the resolution of your monitor and the images you wish to watch).

1Select ‘Video Parameter’ from the System Setup menu.

2Select ‘Resolution’ from the Video Parameter menu.

5.Video Parameter

5b.Resolution

 

a.Video Converter

Resolution

AUTO

b.Resolution

 

 

c.Aspect

 

 

Return

 

Return

3 Select output resolution.

• AUTO – The resolution is selected automatically

according to the capacity of the TV (monitor) connected

by HDMI.

• PURE – The signals are output with the same resolution

as when input.

• 480p/720p/1080i/1080p – The signal is output with the

resolution specified here (480p means the resolution of

3 Select the setting for converting each type of video input.

• ON – The signal is output also to the HDMI OUT terminal.

• OFF – The signal input from the HDMI terminal of the selected input function will be output from the HDMI OUT terminal. The signal input from the analog composite video and the component video will not be output from the HDMI OUT terminal.

4 When you’re finished, press RETURN.

You return to the Video Parameter menu.

40

480p/576p).

4 When you’re finished, press RETURN.

You return to the Video Parameter menu.

Note

•When set to a resolution with which the TV (monitor) is not compatible, no picture is output. Also, in some cases no picture will be output due to copyright protection signals. In this case, change the setting.

•When a display is connected by HDMI, if this is set to something other than PURE and 480i/576i analog signals are input, 480p/576p signals are output from the component output terminals.

En