Voltage selector
You can find the voltage selector switch on the rear panel of
The factory setting for the voltage selector is 220V. Please set it to the correct voltage for your country or region.
•Saudi Arabia operates on 127V and 220V mains voltage. Please set to the correct voltage before using.
•For Taiwan, please set to 110V before using.
•For Mexico, please set to
Before changing the voltage, disconnect the AC power cord. Use a medium size screwdriver to change the voltage selector switch.
TWO VOLTAGE SELECTORS
220V | 230- | ||
|
|
| 240 V |
110V | |||
110V |
|
| 220V |
|
| ||
|
| ||
For Taiwan exclusively
Taiwanese two pin flat-bladed plug
This product is for general household purposes. Any failure due to use for other than household purposes (such as
Changing the TV format setting
If the System Setup menu is not displayed correctly, it may be that the TV system is set incorrectly for your country or region.
•With the receiver in standby, press STANDBY/
ON while holding down the SIGNAL SELECT button.
The display shows the new setting (PAL or NTSC).