
Connections
!Connect the power cord after all the connections between devices have been completed.
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Refer to the operating instructions for the component to be connected.
!Be sure to use the power cord and AC adapter included with this product.
Connecting the input/output terminals
Rear panel, front panel
To power outlet
Power cord (included)
AC adapter (included)
| Component, amplifier, | DJ player | Analog player |
| ||
Computer | powered speaker, etc. |
|
|
| Microphone | |
|
|
|
|
| ||
DJ |
|
|
|
|
|
|
software |
|
|
|
|
|
|
USB cable | To audio input terminals | To audio output | To audio output | To ground | To | |
Audio cable | terminals |
| terminals | terminals | microphone |
Audio cable | Audio cable |
| |
ground wire | Microphone cable |
|
Headphones
To
headphones
Headphones cord
|
| R L |
|
| R | L | R | L |
|
|
|
|
|
|
|
|
|
| SIGNAL |
| |
|
|
|
|
|
|
|
|
| GND |
|
DC IN | USB | R | L R | L | LINE PHONOR | L | LINE PHONOR | L | dB 0dB | MIC |
MASTER OUT2 | MASTER OUT1(TRS) | PHONO2 / LINE2 | PHONO1 / LINE1 | MIC ATT. |
1 2 3 4 5 6 7 6 7 8 9 a b
PHONES
c
1Cord hook
Catch the AC adapter’s power cord and USB cable on this hook when using this unit.
!The sound will be interrupted if the AC adapter or USB cable is disconnected during playback.
Using the cord hook
Fasten the AC adapter’s power cord and USB cable in place by hooking them on the cord hook. This prevents the power cord and USB cable from being accidentally pulled and the plugs from being disconnected from the terminals.
USB cable
| DC IN USB |
Cord hook | AC adapter’s power cord |
2DC IN terminal
Connect the included AC adapter’s DC plug here. Wait until all connections of the equipment are completed before connecting the power cord.
Be sure to use the power cord and AC adapter included with this product.
3 USB terminal
Connect to a computer.
!A USB hub cannot be used.
4MASTER OUT 2 terminals
Connect to a power amplifier, etc.
6LINE, PHONO selector switch
Switches the function of the [PHONO/LINE] terminals.
7PHONO1/LINE1 and PHONO2/LINE2 terminals
Connect a phono level output device (analog player (for MM car- tridges), etc.) or a line level output device (DJ player, etc.) here. Switch the terminals’ function according to the connected device using the [LINE, PHONO] selector switch on this unit’s rear panel.
8SIGNAL GND terminal
Connects an analog player’s ground wire here. This helps reduce noise when the analog player is connected.
9Kensington security slot
AMIC ATT. control
Adjusts the audio level input to the [MIC] terminal.
!The gain of the sound input to the microphone differs greatly according depending on the microphone being used. The [MIC ATT.] control on this unit’s rear panel is used to adjust the audio level according to the microphone before DJ perfor- mances. During DJ performances, use the [MIC LEVEL] control on the top of this unit to adjust the microphone’s volume.
BMIC jack
Connects a microphone here.
CPHONES jacks
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø 3.5 mm) can be used.
!There are two input jacks, both a stereo phones jack and a mini phones jack, but do not use both simultaneously. If both are used simultaneously, when one is disconnected and/or connected, the volume of the other may increase or decrease suddenly.
5MASTER OUT 1 terminals
Connect powered speakers, etc., here.
Compatible with balanced or unbalanced output for a TRS connector.
10En