Functions and operations

Problem

Check

 

Remedy

 

Can’t crossfade.

Is the [CROSS F. CURVE (THRU, ,

)] (cross-

Set the [CROSS F. CURVE (THRU, ,

)] (crossfader curve selector) switch

 

 

fader curve selector) switch set to [THRU]?

to a position other than [THRU]. (Page 23)

 

Back cue function does not work.

Is a cue point set?

 

Set a cue point. (page 16)

 

 

 

 

No effect.

Is one of the [FX SELECT] buttons (TRANS,

Press one of the [FX SELECT] buttons (TRANS, FLANGER, ECHO or ROLL). (page

 

FLANGER, ECHO or ROLL) pressed?

 

21)

 

 

Is the [LEVEL/DEPTH] control set to the center

Turn the [LEVEL/DEPTH] control clockwise or counterclockwise. (page 21)

 

position?

 

 

 

 

Is the [BEAT] control set to the proper position?

Set the [BEAT] control to the proper position. (page 21)

 

 

 

 

 

[SYNC] function does not work.

Has the music file been analyzed?

 

Analyze the file. (page 26)

 

[SYNC] function does not work even

Is the beat grid irregular?

 

Set the beat grid properly. (page 26)

 

when files are analyzed.

Is the beat grid properly tapped?

 

 

 

Are the BPMs of the tracks in the two decks too different?

The [SYNC] function will not work properly if the BPM of the track on the deck for which the [SYNC] button is pressed is outside the adjustable tempo range of the track on the deck for which the [SYNC] button is not pressed.

Are you scratching?

The [SYNC] function is disabled when scratching.

Recording is not possible.

Is the external device or microphone properly

 

connected?

Check the connection of the external device or microphone. (page 10)

Is the channel you want to record properly selected?

Select the channel you want to record properly.

Auto mixing is not possible.

Is a track on a playlist selected?

Select a track on a playlist.

 

 

Are there at least two playable tracks on the

Put at least two playable tracks on the playlist.

playlist?

 

Are the [DECK1, PHONO1/LINE1] and [DECK2,

When the [DECK1, PHONO1/LINE1] and [DECK2, PHONO2/LINE2] selector

PHONO2/LINE2] selector switches set to the

switches are set to the [PHONO/LINE] side, the auto mixing function cannot be

proper positions?

used. Set both selector switches to the [DECK] side. (page 25)

 

 

Settings are not stored in the memory. Has the power been turned off directly after

After changing settings, wait at least 10 seconds before turning the power off.

changing the setting?

 

 

 

USB devices

Problem

Check

Remedy

USB device is not recognized.

Is the USB device properly connected?

Connect the device securely (all the way in).

Is the USB device connected via a USB hub?

USB hubs cannot be used.

 

 

Is the USB device supported by this unit?

This unit supports such USB mass storage class USB devices as external hard

 

disks and portable flash memory devices.

Is the file format supported by this unit?

Check the file format of the connected USB device. For the file formats supported by this unit, see Playable USB devices on page 5.

 

Are you using a USB device (such as a bus power-

Use a USB device within this unit’s rated current (such as a hard disk driven by

 

driven hard disk) whose current is higher than this

an AC adapter or other external power supply).

 

unit’s rated current (500 mA)?

 

 

 

 

 

—

Turn the power off, wait 1 minute, then turn the power back on.

Time is required to read USB devices

Is there a large number of folders or files recorded

When there are many folders or files, some time may be required for loading.

(flash memory drives and hard discs).

on the USB device?

 

Are files other than music files stored on the USB device?

When files other than music files are stored in folders, time is required to read them as well. Do not store files or folders other than music files on the USB device.

Playback does not start when a track Are the files playable?

See Playable music file formats on page 5.

is loaded from a USB device.

 

 

Is the auto cue function activated?

Press the [TIME(AUTO CUE, QUANTIZE)] button for over 1 second to cancel the

 

auto cue function. (page 19)

No sound is produced or the sound is faint when playing a track recorded on a USB device.

Is the [MASTER LEVEL] control set to the proper position?

Adjust the [MASTER LEVEL] control so that the master level indicator’s orange indicator lights at the peak level before recording. (Page 23)

Sound is distorted when playing a track recorded on a USB device.

Is the [TRIM] control set to the proper position?

Adjust the [TRIM] control so that the channel level indicator’s orange indicator lights at the peak level before recording. (Page 23)

File cannot be played.

Is the file copyright-protected (by DRM)?

Copyright-protected files cannot be played.

 

 

 

Music files cannot be played.

Are the music files damaged?

Play music files that are not damaged.

34En