Pioneer XDJ-AERO Mixing using the faders, Disconnecting links, Mixing using the crossfader, Mixing using the channel faders

8 Turn the [MASTER LEVEL] control clockwise.

Sound is output from the speakers. The [LEVEL] indicator lights.

Adjust the [MASTER LEVEL] control so that the orange indicator lights where the track’s volume is highest (at the climax, etc.).

Be careful that the red indicator does not light, or the sound could be distorted.

Mixing using the faders

Prepare the unit in advance so that the sound of [CH 1] is being output from the speakers. For instructions on preparation, see Outputting sound on page 23.

For instructions on monitoring the sound, see Monitoring sound with headphones on page 20.

Mixing using the channel faders

1Set [CROSS F. CURVE THRU, ,] (the crossfader curve selection switch) to [THRU].

2Switch the [DECK2, PHONO2/LINE2] selector switch in the [CH 2] section.

3Turn the [CH 2] [TRIM] control clockwise.

4Press the [ (CH2)] button.

The sound of [CH 2] is monitored from the headphones.

5 Turn the [HEADPHONES MIXING] control.

This adjusts the balance of the monitor volume between the sound output from the [MASTER OUT 1] and [MASTER OUT 2] terminals (the sound of [CH 1]) and the sound of [CH 2].

6 Operate [DECK2].

While checking the sound over the headphones, adjust the tempo of [CH 2] track to match the tempo of [CH 1] track.

7While moving the [CH 2] channel fader to the back, move the [CH 1] channel fader to the front.

While checking the sound output from the speakers, operate the channel faders to substitute the sound of [CH 1] with the sound of [CH 2]. Mixing is completed once only the [CH 2] sound is being output from the speakers.

Mixing using the crossfader

1Set [CROSS F. CURVE THRU, ,] (the crossfader curve selector switch) to [] or [].

2Operate [CH 2].

Operate as described in steps 2 to 6 under Mixing using the channel faders on page 24.

3 Move the crossfader gradually to the right.

While checking the sound output from the speakers, operate the cross- fader to substitute the sound of [CH 1] with the sound of [CH 2].

Mixing is completed once only the [CH 2] sound is being output from the speakers.

Disconnecting links

Links with mobile devices can be disconnected.

!For instructions on disconnecting links with computers, see the Operating Instructions for rekordbox (Mac/Windows).

1 Press the [INFO(UTILITY)] button for over 1 second.

The [UTILITY] screen is displayed.

2Turn the rotary selector to select [LINK DISCONNECT], then press the rotary selector.

A list of the mobile devices on which rekordbox (iOS/Android) is installed and with which links with this unit are established is displayed on the main unit display.

3Turn the rotary selector to select the mobile device whose link you want to disconnect, then press the rotary selector.

The link with the selected mobile device is disconnected.

24En