Pioneer S-DV434SW manual Connecting using the component video output, About progressive scan video

Other connections

Connecting using the component video output

If your TV has component video inputs, you can use these instead of the standard video output

to connect this system to your TV.1 This should give you the best quality picture from the three types of video output available.

•Use a component video cable to connect the COMPONENT VIDEO OUT to a set of component inputs on your TV.

COMPONENT

INPUT

TV

08

		Important		English
• If you connect a TV that is not compatible
	with a progressive scan signal and switch
	the system to progressive, you will not be
	able to see any picture at all. In this case,
	press STANDBY/ON to put the system			Deutsch
	in standby, then press and hold the front
	panel (stop) button for about 8 seconds
	until the display shows Mem.Clr.?. Press
	the front panel VOLUME – (DOWN) or +
	(UP) button so that the display shows
				Français
	Interl?. Press the front panel		button
	to set to interlace and switch the system
	back on.
Compatibility of this player with
progressive-scan and high-definition TVs				Italiano
This player is compatible with progressive
video Macro Vision System Copy Guard.2
This system is compatible with the following
Pioneer displays and monitors: PDP-503HDG,
PDP-504HDG, PDP-433HDG, PDP-434HDG.

OPTICAL IN	IN
AUDIO
LINE 2		FM
COMPONENT		UNBAL 75Ω
VIDEO OUT
Y
VIDEO	PR S-VIDEO
OUT	VIDEO	OUT

XV-DV333/434

AM LOOP ANTENNA

Nederlands

Español

About progressive scan video

Compared to interlace video, progressive scan video effectively doubles the scanning rate of the picture, resulting in a very stable, flicker- free image. Progressive scan video is available only from the component video output.

Note

1The component video output is switchable between interlaced and progressive formats. See Video Output settings on page 25.

2Consumers should note that not all high-definition television sets are fully compatible with this product and may cause arti- facts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this model, please contact our customer service center.

31

En