04Using the timer
Chapter 4
Using the timer
Setting the wake-up timer
Use the
Important
•The clock must be set for the
1Select the source you want played. For example, press TUNER (FM/AM on the front panel) to select the radio as your source.
2Prepare the source and set the volume. For example, tune in the radio station you want to wake up to. Adjust the volume as necessary.
3Press TIMER/CLOCK twice.
4 | Use | to select |
ENTER. |
| |
5 | Use | to select ‘Edit ?’ then press |
ENTER. |
|
•You can check the timer settings in standby by pressing TIMER/CLOCK twice.
Turning the wake-up timer on/off
If you have already set the
Setting the sleep timer
The sleep timer switches off the system after a specified time so you can fall asleep without worrying about it.
Important
•If you set the sleep timer while either the
1Press TIMER/CLOCK twice to reach the timer menu.
2 Use | to select ‘Sleep?’ then press |
ENTER. |
|
6 Set the
Use to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.
7 Set the
Set as above, pressing ENTER when done. The
8Switch the system into standby mode. The
3 Use to select a
Choose between the following options:
•Auto – Switches off automatically after the currently playing CD, Video CD or DivX video disc has finished.1
•Sleep 90 – Switches off after 90 minutes
•Sleep 60 – Switches off after an hour
•Sleep 30 – Switches off after 30 minutes
•Off – Cancels the sleep timer
4To check how much time is left, repeat steps 1 and 2.
The remaining time is displayed momentarily.
Note
1 Sleep Auto will not work with Video CD/Super VCDs during PBC playback or CDs in repeat play.
20
En