Surround sound and other settings
SR+ Setup for Pioneer plasma displays
Make the following settings if you have connected a Pioneer plasma display to this unit using an SR+ cable. Note that the number of function settings available will depend on the plasma display you’ve connected.
See also Using this unit with a Pioneer plasma display on page 32.
1Press SR+ on the remote.
2When you see ‘Setup?’ appear in the display, press ENTER.
3 Use | to select the setting you want. |
•Vol COff – This unit does not control the volume of the plasma display
•VOL C ON – When this unit is switched to one of the inputs that use the plasma display (DVD, or another one of functions below), the volume on the plasma display is muted so only sound from this system is heard.
4Assign any input source connected to the plasma display to the corresponding input number.
Use | to select the source (DVD, TV, L.1 | |
or L.2), then | to select the input number. | |
This matches this unit’s input source with a numbered video input on the plasma display. For example, assign DVD:3 if you have connected the your DVD video output to video input 3 on the plasma display.
5 When you're finished, press ENTER.
05
English Deutsch Français Italiano Nederlands Español
23
En
