Pioneer S-DV434SW Additional information Chapter, Optional system settings, Key lock setting

Additional information

Chapter 10

Additional information

10

English

Optional system settings

These settings are accessed by using the System Setup menu while in standby.

1Switch the system into standby.

2Press SYSTEM SETUP.

3 Use to choose the setting you want to adjust then press ENTER.

The current setting is shown for each option as you cycle through the display. See below for a full list and description of each.

4 Use to adjust the setting.

5Repeat steps 2 and 3 to make other settings then press ENTER to confirm.

System Setup menu options in standby

Below are all the available settings in the setup menu. The first setting in each is the default.

System demo setting

Switches the automatic demo feature on or off1 (this starts when you plug in for the first time):

•Demo On – Switches the demo feature on.

•Demo Off – Switches the demo feature off.

Key lock setting

The Key Lock feature is useful when you’ve set the wake-up timer and don’t want the system switched on before it activates.

•Lock On – Makes the front panel buttons and controls inoperative.

•Lock Off – Restores regular use of the front panel buttons and controls.

Clock format setting

Specifies how the clock is displayed:

•12-Hour– Display shows 12-hour format.

•24-Hour– Display shows 24-hour format.

TV / Line attenuator settings

If the source connected to the analog TV IN input (TV) or LINE1 input (L1) is distorting, the attenuator will reduce the signal level.

•ATT 6dB – Reduces signal level by 6dB.

•ATT 10dB – Reduces signal level by 10dB.

•ATT Off – No attenuation

Frequency step setting

If you find that you can’t tune into stations successfully, the frequency step may not be suitable for your country/region.

•AM 9K

•AM 10K

Deutsch Français Italiano Nederlands Español

TV system setting

Not applicable to the Taiwan model

The default setting of this system is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you find picture distortion with

Note

1After setting the clock, the demo mode switches off automatically. However, if you unplug the system from the wall outlet, the demo mode will revert to Demo On (and the clock will be reset).

37

En