Pioneer XW-HT1 Additional information, Taking care of the unit, Cleaning the unit’s exterior

Additional information

Symptom	Cause & Remedy
The POWER indicator	• It is likely that the system is malfunctioning. Ask your nearest Pioneer
goes out when the	authorized service center or your dealer to carry out repair work.
switch is on or the
system is in operation.

Caution

Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplugging the power cord and then re-plugging it in will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest Pioneer service center.

05

English

Taking care of the unit

Cleaning the unit’s exterior

•Use a polishing cloth or dry cloth to wipe off dust and dirt. If the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth.

•Do not use furniture wax or cleaners. Never use thinners, benzine or insecticide sprays or other chemicals on or near this unit since they will corrode the surfaces.

•If you use a chemical-impregnated cleaning cloth, read the instructions carefully before use. These cloths may leave smear marks on half-mirror finish surfaces; if this happens, finish with a dry cloth.

•Unplug the unit when cleaning.

Problems with condensation

Condensation may form inside the unit if it is brought into a warm room from outside, or if the temperature of the room rises quickly.

Although the condensation won’t damage the unit, it may temporarily impair its performance. For this reason you should leave it to adjust to the warmer temperature for about an hour before switching on and using.

Hints on installation

We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it:

Do...

•Use in a well-ventilated room.

•Place on a solid, flat, level surface, such as a table, shelf or stereo rack.

•Be sure to switch the wireless speaker off when not in use.

Don’t...

•Use in a place exposed to high temperatures or humidity, including near radiators and other heat-generating appliances.

•Place on a window sill or other place where the unit will be exposed to direct sunlight.

•Use in an excessively dusty or damp environment.

•Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use.

•Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna.

•Use in a kitchen or other room where the unit may be exposed to smoke or steam.

23

En