Pioneer XW-NAS5 Using the tuner

06Using the tuner

Chapter 6:

Using the tuner

Connect the FM antenna

Connect the FM antenna plug onto the center pin of the FM antenna socket.1

FM wire antenna

AC IN	ANTENNA
	FM UNBAL 75

Automatic tuning – To search for stations, press and hold TUNE +/– for about a second. The receiver will start searching for the next station, stopping when it has found one. Repeat to search for other stations.

Manual tuning – To change the frequency one step at a time, press TUNE +/–.

High speed tuning – Press and hold TUNE +/– for high speed tuning. Release the button at the frequency you want.

Listening to the FM radio

The tuner can receive FM broadcasts, and lets you memorize your favorite stations so you don’t have to manually tune in every time you want to listen.

STANDBY/ON

INPUT

PRESET		PRESET
		ENTER
		TUNE
SLEEP	WAKE	BASS/
SLEEP	UP	TREBLE
	UP	TREBLE
		TUNE
CLOCK	SETUP	TUNER
CLOCK	SETUP	PRESET
		PRESET

1Press INPUT to switch to the tuner. The tuner indicator will light, and the tuned frequency will be displayed.

2Tune to a station.

There are three ways to do this:

Memorizing stations

You can save up to 10 station presets so that you always have easy access to your favorite stations without having to tune in manually each time.2

1Press INPUT to switch to the tuner.

2Tune to an FM radio station.

3Press TUNER PRESET.

4Use TUNE +/– to select the station preset

you want (e.g., ‘’) then press ENTER.

Listening to station presets

1Press INPUT to switch to the tuner.

2Use PRESET +/– to select a station preset.

Note

1To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.

2When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwritten with the new one.