Using the timer

Chapter 8:

Using the timer

Setting the clock

Setting the clock allows you to use the timer.1

PRESET

 

PRESET

 

 

ENTER

 

 

TUNE

SLEEP

WAKE

BASS/

UP

TREBLE

 

 

 

TUNE

CLOCK

SETUP

TUNER

PRESET

 

 

1Switch the unit into standby.

2Press SETUP.

3Use / to select ‘’, then press

ENTER.

The current time is displayed.

4Use / to set the hour, then press

ENTER.

5Use / to set the minute, then press

ENTER.

When the setting is completed, the newly set value flashes for 3 seconds, then the power returns to standby mode.

3Use / to select display setting, then press ENTER.

• – Display is turned off except when entering commands.2

• – Clock display appears except when entering commands.

• – Displays values constantly except when entering commands. When power is on standby mode, displays clock.2

Changing the clock’s display mode

You can choose to display the clock in 12-hour mode or 24-hour mode.

• Default setting: (24-hour mode)

1Switch the unit into standby.

2Press SETUP.

3Use / to select ‘’ then press

ENTER.

4Use / to select ‘’ or ‘ ’ then press ENTER.

When the setting is completed, the newly set value flashes for 3 seconds, then the power returns to standby mode.

08

Español Nederlands Italiano Français Deutsch English

Display mode setting

Use to switch the display mode (clock display,

Setting the wake-up timer

etc.)

 

Use the wake-up timer to set the unit to switch

1

With the power turned ON, press SETUP.

on at any time and start playing whatever

source you want.

 

 

 

2

Use / to select ‘

’, then press

If iPod is selected as the timer sound, when the

ENTER.

 

wake-up timer operates, the iPod’s power will

The current time is displayed.

automatically turn ON and playback will begin.

Note

1You’ll need to set the clock again if you unplug the unit (or in case of a power failure).

2When power is ON or in standby mode, the current time can be checked by pressing the CLOCK button.

21

En