08Using the timer

1With input set to iPod or tuner, press

SETUP.

2Use / to select ‘ ’, then press

ENTER.

Timer setting time is displayed.

3Set the desired time for the timer.

Use / to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you’re done.

4Use / to select the input source to be used as the timer sound, then press ENTER. While selecting the input source, the sound from that source will be audible (except when beep is selected). Use the VOLUME +/– buttons to adjust the sound volume.

If is selected, an electronic tone will sound.

5Use / to set the snooze function to

ON/OFF as desired, then press ENTER.

The timer time, input setting, snooze setting, and volume setting will be displayed in order, thus completing the wake-up timer setting.

The timer indicator lights.

If any other button is pressed or playback continues for one minute, the timer sound will stop, but the snooze function will operate and five minutes later the timer sound will playback again.

While the snooze function is operating, no buttons can be used other than WAKE UP and the main unit’s  STANDBY/ON. (To turn the timer function OFF, press the WAKE UP button two times.)

The snooze function repeats up to five times. After that, the unit’s power turns off automatically.

When finished using the timer, set the timer function to OFF (see below).

Turning the wake-up timer on/off

Press WAKE UP.

Each time the button is pressed, the timer function switches alternately to ON/OFF.

When the timer is set to ON, the timer indicator lights.

Using the sleep timer

When the wake-up timer sounds

If the snooze function is OFF:

Press the main unit’s  STANDBY/ON button to stop the timer playback and turn power off. Alternately, wait for one hour (when beep is selected, wait for one minute) and playback will stop automatically and power will turn off.

If any other button is pressed, the timer playback stops and normal playback of the currently selected input source will begin.

When finished using the timer, set the timer function to OFF (see below).

If the snooze function is ON:

Press the main unit’s  STANDBY/ON button to stop the timer playback and turn power off.

The sleep timer switches off the unit after a specified time so you can fall asleep without worrying about it.

Press SLEEP repeatedly to select a switch- off time.

Choose between 5 min, 15 min, 30 min, 60 min, 90 min or Off.

The remaining time is displayed while the sleep timer operates.1

Note

1 The sleep timer can be reset by pressing the SLEEP button while the sleep timer is operating.

22

En