Pioneer Industrial DV-470 operating instructions Connecting to an AV receiver

02Connecting up

Compatibility of this player with progressive-scan and high-definition TVs

This player is compatible with progressive video Macro Vision System Copy Guard.

Consumers should note that not all high- definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525/625 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this model, please contact our customer service center.

This player is compatible with the following Pioneer displays and monitors:

PDP-504HDE, PDP-434HDE

Connecting to an AV receiver

To enjoy multichannel surround sound you need to connect this player to an AV receiver using the digital audio output. This player has both coaxial and optical digital jacks; use whichever is convenient.

For a coaxial connection, use a coaxial cable (similar to the supplied video cable) to connect the COAXIAL DIGITAL AUDIO OUT jack to a coaxial input on your AV receiver.

				DIGITAL IN
				(OPTICAL)
	AV receiver			DIGITAL IN
				(COAXIAL)
	Y		PB
	L
	COAXIAL
	R
1 2	OPTICAL	VIDEO	PR	S
AUDIO OUT	DIGITAL AUDIO OUT	OUT	COMPONENT VIDEO OUT	VIDEO OUT

2Connect the analog AUDIO OUT L/R and VIDEO OUT jacks on this player to a set of analog audio and video inputs on your AV receiver.

AV receiver	AUDIO/
	VIDEO IN

In addition to a digital connection, we recommend also connecting using the stereo analog connection.

L

Y PB

You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player (the illustration shows a standard (composite) connection).

1Connect one of the DIGITAL AUDIO OUT jacks on this player to a digital input on your AV receiver.

This enables you to listen to multichannel surround sound.

For an optical connection, use an optical cable (not supplied) to connect the OPTICAL DIGITAL AUDIO OUT jack to an optical input on your AV receiver.

12

		COAXIAL
		R
1	2	OPTICAL	VIDEO	PR	S
AUDIO OUT		DIGITAL AUDIO OUT	OUT	COMPONENT VIDEO OUT	VIDEO OUT

•You can use the SCART AV connector, or the S-video or component video jacks to connect to the AV receiver if you prefer.

En