Manuals / Pitney Bowes / Computer Equipment / Postal Equipment

Pitney Bowes DI200 manual Loading the Envelope Feeder Feeder B

Models: DI200

1 49

Download 49 pages 33.75 Kb

Page 13

Loading

Loading the Envelope Feeder (Feeder B)

Always fan (aerate) envelopes before you load them. This prevents them from sticking together.

Then tap the stack of envelopes onto a firm surface to align the edges.

IMPORTANT:

Load envelopes right way up and facing you. This means that the envelope flap is on the back of the envelope and at the top. Any other orientation will prevent the machine from inserting properly.

Place the envelope stack into Feeder B with the back envelope flat against the feed belts. There’s no need to “shingle” or stagger the envelope stack.

Slide the two side guides up to the envelope stack then slightly back them off. Use the blue handles at the rear of the guides when moving them.

The correct setting is achieved when the guides control the envelopes but in no way restrict their feed into the machine or cause them to feed at an angle (skew).

IMPORTANT: If the guides are too

tight, envelopes may not feed reliably; if the guides are too loose, envelopes may skew as they feed into the machine.

OfficeRight™ DI200 Operator’s Guide

11

Image 13

Pitney Bowes DI200 manual Loading the Envelope Feeder Feeder B

Contents

Operating Guide Statement of FCC Compliance Canada Contents Important Safety Information SafetyIntroduction Machine ConfigurationsAbout Your Machine Insert Cover E Release Button Blue Button Marked E Machine Controls, Indicators and FeaturesInsert Feeder Not on All Models Operating Guide SlotLifting Handles One Each Side Moistener TankSecond Sheet Feeder A2 Optional Standard Sheet Feeder A1Display ControlsMenu/Enter Yes and no buttonsAbout the Sleep Mode Selection Buttons and Indicator LightsTrial Piece StartLoading Connecting Power and Turning OnFilling the Moistener Important Always Loading the Sheet Feeders Feeders A1 and A2Loading the Envelope Feeder Feeder B Loading the Insert Feeder Feeder C Running Jobs RunningModels with an Optional Second Sheet Feeder A2 One Folded Sheet into an Envelope JobStep Action Tips More Details… One Folded Sheet, No Envelope Fold OnlyInto an Envelope One Folded Sheet + One InsertOne Folded Sheet + One Insert into an Envelope Step Action Tips For More Details… One Insert into an EnvelopeSeal or No Seal Two Folded Sheets into an EnvelopeEnvelope Two Collated, Folded Sheets into anTwo Folded Sheets, No Envelope Fold Only Two Collated, Folded Sheets No Envelope Fold Only Into an Envelope Two Folded Sheets and an InsertTwo Folded Sheets and an Insert into an Envelope Insert into an Envelope Two Collated, Folded Sheets and anTwo Collated, Folded Sheets and an Insert into an Envelope Manual Feeder M Manual FeedMenu Reset CounterMove the Address in the Window Change Paper SizeWhen turned off… When turned on…Sheet Double Detect On/Off Safe Seal On/Off Insert Double Detect On/OffReference Reference Error MessagesLift Cover D Insert Remove Sheet Poor folding General TroubleshootingMachine stops for doubles that aren’t there Machine feeds doubles without stopping…from sheet feeders/manual feeder Clearing Material Jams…from area beneath cover D …from area beneath cover E Getting HelpOnline Support Phone SupportOrdering Online USA Only Ordering SuppliesOrdering by Phone Requesting a PB Supply Catalog USA OnlySheet Feeders A1 and/or A2 Material SpecificationsMachine Specifications Index Index Index Index SV40189-OGREVB