Introduction
5.Moistener Tank
This tank contains
6.Lifting Handles (One Each Side)
Always lift the OfficeRight™ DI200 using the side handles. DO NOT lift the machine by any of the feeders or the stacker.
7.Second Sheet Feeder A2 (Optional)
You can add this feeder to the machine to enable folding and inserting of a second sheet into the envelope. It functions in exactly the same way as the standard sheet feeder, A1.
IMPORTANT: When you use both sheet feeders A1 and A2 together, always load the address bearing
sheet into sheet feeder A2. If you fail to do this, the
address won’t show in the envelope window. Always load sheets into feeder A2 face down and bottom edge
first, that is, with the bottom edge of the sheet furthest into the machine.
8.Standard Sheet Feeder A1
This feeder enables folding and inserting of a sheet into the envelope. Always load sheets into this feeder face down and bottom edge first.
9.Manual Feeder M
Use this feeder to manually feed stapled sets of up to three sheets each. The machine waits for you to feed each set by hand into this feeder before it folds and inserts the set automatically. Always feed sheets into this feeder face down and bottom edge first, that is, with the bottom edge of the sheet furthest into the machine.
10.Stacker
The machine delivers finished pieces to this area.
11.Front Cover D Release Button (Blue Button Marked D)
Press this button to release the front cover if a jam occurs in this area of the machine. The display prompts you if you need to open this cover to remove jammed material.
12.Envelope Feeder B
This feeder feeds envelopes into the inserting area where they are filled with sheets or inserts from other feeders.
OfficeRight™ DI200 Operator’s Guide | 5 |
