The picture is not sharp.

The reception may be weak.

The state of the broadcast may also be bad.

Make sure the antenna is not disconnected.

The picture moves.

The reception may be weak.

The state of the broadcast may also be bad.

Make sure the antenna is not disconnected.

The picture is doubled or tripled.

Make sure the antenna is facing the right direction.

There may be reflected electric waves from mountains or buildings.

The picture is spotted.

There may be interference from automobiles, trains, high voltage lines, neon light, etc.

There may be interference between the antenna cable and power cable. Try possible them further apart.

There are stripes on the screen or colors fade.

Is the unit receiving interference from other devices?

• Transmission antennas of radio broadcasting station and transmission antennas of amateur radio and cellular phones may also cause interference.

Use the units as far apart as possible from device that may cause possible interference.

35

Page 39
Image 39
Planar PDP42HD user manual Picture is not sharp