FGSW-2620VM / FGSW-2624SF User’s Manual

FGSW-2624SF LED indication

„ System

LED

Color

Function

PWR

Green

Lights to indicate that the Switch has power.

 

 

 

„Per 100Base-FX SFP slot

LED

Color

Function

LNK/ACT

Green

Lights to indicate the link through that port is successfully established.

 

 

 

„Per 10/100/1000Base-T port /SFP interfaces

LED

Color

Function

 

 

 

 

 

Lit: indicate that the port is operating at 1000Mbps.

LNK/ACT 1000

Green

Off: indicate that the port is operating at 10Mbps or 100Mbps.

 

 

Blink: indicate that the switch is actively sending or receiving data over that port.

 

 

 

 

 

Lit: indicate that the port is operating at 100Mbps.

LNK/ACT 100

Green

Off: indicate that the port is operating at 10Mbps or 1000Mbps.

 

 

Blink: indicate that the switch is actively sending or receiving data over that port.

 

 

 

FDX

Green

Lit: indicate that the port is operating at full-duplex mode.

Off: indicate that the port is operating at half-duplex mode.

 

 

 

 

 

1.Press the RESET button once. The t Switch will reboot automatically.

2.Press the RESET button for about 10 seconds. The Switch will back to the factory default mode; the entire configuration will be erased.

3.The 2 Gigabit TP/SFP combo ports are shared with port 25/26 of FGSW-2620VM. Either of them can operate at the same time.

12