Deny Policy Sample
Case 1: Deny specific Source IP Address – Host
Purpose:
Verify positive and negative matches to a specific host IP address with a 32 bit mask, no matter the rule defined as permit or deny. Check for Class A,B, and C address.
1.To set a Host as the target at this case.
2.Once the deny policy be applied, all IP packets from the target Host IP Address will be dropped.
3.No matter IP packets form the target be transmitted to Internet or Intranet within the same IP segment, they will be dropped.
Case Design:
Action | DENY | |
|
| |
Match | IP | |
Source IP Address | Host IP | |
192.168.1.1 / 255.255.255.255 | ||
| ||
Destination IP Address | ANY | |
|
|
Device Connection and Configuration:
85