FGSW-2620VM / FGSW-2624SF User’s Manual

 

 

 

 

 

 

 

 

 

Object

Description

 

 

 

 

 

 

802.1x Protocol

Disable or enable 802.1x Protocol.

 

 

 

 

 

 

Radius Server IP

Set the Radius Server IP address.

 

 

 

 

 

 

Server Port

Set the UDP destination port for authentication requests to the specified Radius

 

 

 

Server.

 

 

 

 

 

 

Accounting Port

Set the UDP destination port for accounting requests to the specified Radius

 

 

 

Server.

 

 

 

 

 

 

Shared Key

Set an encryption key for use during authentication sessions with the specified

 

 

 

radius server. This key must match the encryption key used on the Radius Server.

 

 

 

 

 

 

NAS, Identifier

Set the identifier for the radius client.

 

 

 

 

 

 

Apply Button

Press this button to save the value on the Switch.

 

 

 

 

 

3.Setup the RADIUS server and assign the client IP address to the Web-Smart switch. In this case, field in the default IP Address of the Web-Smart switch with 192.168.0.100. And also make sure the shared secret key is as same as the one you had set at the switch RADIUS server – 12345678 at this case.

4.Configure ports attribute of 802.1X, see the next section “Per Port Status Configuration”.

67