FGSW-2620VM / FGSW-2624SF User’s Manual

4.3.2.2 Per Port Configuration

You can configure path cost and priority of every port.

 

Figure 4-3-7SPT - Per Port Configuration interface

 

 

Object

Description

 

 

Port

 

 

 

Path cost

The cost of the path to the other bridge from this transmitting bridge at the specified

 

port. Enter a number 1 through 200000000.

 

 

Priority

Decide which port should be blocked by priority in LAN. Enter a number 0 through

 

240 in steps of 16.

 

 

Admin P2P

Some of the rapid state transactions that are possible within RSTP are dependent

 

upon whether the Port concerned can only be connected to exactly one other

 

Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to

 

two or more Bridges(i.e., it is served by a shared medium LAN segment). The

 

adminPointToPointMAC allow the p2p status of the link to be manipulated

 

adminitratively.

 

 

Admin Edge

Present in implementations that support the identification of edge ports. All ports

 

directly connected to end stations cannot create bridging loops in the network and

 

can thus directly transition to forwarding, skipping the listening and learning stages.

 

 

Admin Non Stp

If true, this port will not participate in RSTP.

 

 

Apply button

Press the button to save the modification.

 

 

55