Planet Technology 2.1.1 LED Indicators, 2.1.2GT-90XRear Panel, Figure, “RESET”, #Notice:, ■GT-90xseries, Power Notice:

2.1.1 LED Indicators

LED		Color			Description
PWR		Green			Lit: When +5VDC power detected.
Fiber LNK/ACT	Green				Lit: To indicate the link through that fiber port is successfully established.
				Blink: Indicate that the Fiber port is actively sending or receiving data over that port.
TP LNK/ACT	Green				Lit: To indicate the link through that port is successfully established.
					Blink: Indicate that the port is actively sending or receiving data over that port.
TP 1000		Green			Lit: When the port runs in 1000Mbps Full duplex mode
					Off: When the port runs in 10/100Mbps Half / Full duplex mode.
#Notice:
			To press and release the RESET button. The GX-90x will back to the factory default mode. Be

sure that you backup the current configuration of GT-90X; else the entire configuration will be erased when pressing the “RESET” button.

•Press and release the RESET button shortly, the device will be rebooted.

•Press the RESET button more than 10 seconds, the device will back to the factory default mode; the entire configuration will be erased.

2.1.2GT-90X Rear Panel

The rear panel of the Managed Media Converter indicates one DC jack, which accepts input power with 5V DC 2A.

■GT-90x series

Figure 2-4Rear Panel of GT-90x

Power Notice:

1.The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time, please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or network downtime.

2.In some area, installing a surge suppression device may also help to protect your Managed Media Converter from being damaged by unregulated surge or current to the converter or the power adapter.

-7-