Planet Technology 4.3 Port Management, 4.3.1 Port Configuration, Port, Link, Mode, “Down”, TP Port:, “Refresh”, 1000 Full, • 10 Full, • 10 half, 1000 Full, Auto Speed

4.3 Port Management

4.3.1 Port Configuration

This function allows displaying TP / Fiber port status. The Link Status in the screen displays the current connection speed and duplex mode; else this function will show red “Down” when the TP / Fiber port is disconnected. Press the “Refresh” button to renew the screen. The screen in Figure 4-20appears and Table 4-6describes the Port Configuration object of Managed Media Converter.

	Figure 4-20Port Configuration Web Page screen
The Port Configuration Web page includes the following configurable data:
Port	Indicate the TP port and Fiber port.
Link	Displays the current connection speed and duplex mode of TP or Fiber port.
Mode	Allow configuring the TP or Fiber port speed and operation mode. Draw the menu
	bar to select the mode.
	TP Port:
	• Auto Speed - Setup Auto negotiation.
	• 1000 Full - Force sets 1000Mbps Full-Duplex mode.
	• 100 Full	- Force sets 100Mbps Full-Duplex mode.
	• 100 Half	- Force sets 100Mbps Half-Duplex mode.
	• 10 Full	- Force sets 10Mbps Full-Duplex mode.
	• 10 half	- Force sets 10Mbps Half-Duplex mode.
	Default mode: Auto Speed.
	Fiber Port:
	• Auto Speed - Setup Auto negotiation.
	• 1000 Full - Force sets 1000Mbps Full-Duplex mode.
	Default mode: Auto Speed.
		-29-