4.2.2 IP Configuration
The IP Configuration includes the DHCP Client, IP Address, Subnet Mask, Gateway and Description. The screen in Figure
Figure
The IP Configuration Web page screen includes the following configurable data:
DHCP Client | Allow disable or enable the DHCP Client function of the Managed Media Converter, the factory | |
default mode is Disable. | ||
| ||
|
| |
IP Address | Allow assigning a new IP address for the Managed Media Converter, the factory default IP address | |
| is 192.168.0.100. | |
|
| |
Subnet Mask | Allow assigning a new subnet mask for the Managed Media Converter, the factory default subnet | |
| mask is 255.255.255.0. | |
|
| |
Gateway | Allow assigning a new gateway for the Managed Media Converter, the factory default gateway is | |
| 192.168.0.254. | |
|
| |
Description | Allow to input a new description for the Managed Media Converter, up to maximum 32 characters | |
| allow. | |
|
| |
Apply button | Press “Apply” button for save current configuration of Managed Media Converter. | |
|
| |
| Table |
#After change the default IP subnet address, if you forget the IP subnet address. Please press the
Notice: “Reset” button in the front panel of Managed Media Converter for 10 seconds, the current setting will be lost and the Managed Media Converter will restore to factory default mode.