Flow Control

 

Allow Disable or Enable Flow Control of TP or Fiber port.

 

 

• Enable – IEEE 802.3x Flow Control is enabled on Full-Duplex mode or

 

 

Backpressure is enabled on Half-Duplex mode

 

 

• Disable – No Flow Control or backpressure function on no matter

 

 

Full-Duplex or Half-Duplex mode

 

 

Default mode: Disable

Ingress Rate Limit

 

The value of inbound traffic limitation in kilobit-per-second (kbps). The available

 

 

options are :

 

 

• No Limit

 

 

• 512K

 

 

• 1M

 

 

• 2M

 

 

• 4M

 

 

• 8M

 

 

• 10M

 

 

• 50M

 

 

• 100M

 

 

• 500M

 

 

Default mode: No Limit

 

 

The Ingress Rate Limit configuration field as show in Figure 4-21.

 

 

 

Egress Shaping

 

The value of outbound traffic limitation in kilobit-per-second (kbps). The available

 

 

options are :

 

 

• No Limit

 

 

• 512K

 

 

• 1M

 

 

• 2M

 

 

• 4M

 

 

• 8M

 

 

• 10M

 

 

• 50M

 

 

• 100M

 

 

• 500M

 

 

Default mode: No Limit

 

 

The Egress Shaping configuration field as show in Figure 4-22.

 

 

 

Apply button

 

Press this button for save current configuration of Managed Media Converter.

 

 

 

Refresh button

 

Press “Refresh” button to refresh current status.

 

 

 

 

Table 4-6Descriptions of the Port Configuration Web Page Screen Objects

-30-