PLANET Mesh Network Manager Guide

•Data type: Display String, default value is “public”

•Data length: 4 ~ 32

•MUST reenter the same community at the correspond Confirm field to edit

•Please retain this parameters as it is used to plot the topology map

5)Read-Write Community

•The community keyword used for SNMP version 1 or 2c, which allow both the read and write accessing

•Data type: Display String, default value is “private”

•Data length: 4 ~ 32

•MUST reenter the same community at the correspond Confirm field to edit

6)Read-Only Username

•The principal name of the SNMP version 3 daemon, which allow the read accessing only

•Data type: Display String, default value is “snmpv3rouser”

•Data length: 8 ~ 50

7)Read-Write Username

•The principal name of the SNMP version 3 daemon, which allow both the read and write accessing

•Data type: Display String, default value is “snmpv3rwuser”

•Data length: 8 ~ 50

8)Auth Password

•The password used user authentication (SNMP version 3 only)

•Data type: Display String, default value is “snmpv3password”

•Data length: 8 ~ 50

•MUST reenter the same password at the correspond Confirm field

9)Privacy Password

•The privacy protocol pass phrase used for SNMP version 3 only

•Data type: Display String, default value is “snmpv3passphrase”

•Data length: 8 ~ 50

•MUST reenter the same password at the correspond Confirm field

10)Enable Access Control

PLANET Mesh Network Manager Guide

Page116 of 124