Planet Technology MAP-3100 4.2.3.29 Configure Mesh APs, Config, Web-Based, AP Configurator, Enable the option

PLANET Mesh Network Manager Guide

Enable the option

The configuration of the VPN is done.

4.2.3.29 Configure Mesh APs

Two methods are available to configure the Mesh AP unit remotely via the NMS,: thru Web- based Configuration Page or launch the AP Configurator. In order to invoke any of these two methods, right click on any of the active Mesh AP unit on the topology map (gateway or relay). A popup menu would appear, as shown:

Select the AP Configurator or Web-Based Config option. The following figure shows the screenshot of the Web-based Configuration page.

PLANET Mesh Network Manager Guide Page56 of 124