PLANET Mesh Network Manager Guide
5)Enable Hysteresis
•A checkbox to enable the hysteresis of the Mesh AP
•Link hysteresis determines the criteria at which a link to a neighbour is accepted or rejected. Hysteresis adds more robustness to the link sensing, but delays the neighbour registration.
6)Hysteresis Scaling
•The level scale of the hysteresis
•Data type: Float (0.0 ~ 1.0)
7)Hysteresis THR High
•The upper limit (threshold high) of the hysteresis
•Data type: Float (0.0 ~ 1.0)
8)Hysteresis THR Low
•The lower limit (threshold low) of the hysteresis
•Data type: Float (0.0 ~ 1.0)
9)Link Quality Type
•The type of link quality
•Available options:
oDisable
oUse for MPR selection
oUse for MPR selection and Routing
10)Link Quality Size
•The Link quality window size
•Data type: Integer, default size is 10
11)Poll Rate
•The polling rate, where the value is in the interval of 0 and 1
•Data type: Float
12)TC Rate
•The TC redundancy specifies the level of neighbour information should be sent in a TC message.
•Available options:
PLANET Mesh Network Manager Guide | Page88 of 124 |