PLANET Mesh Network Manager Guide
•A checkbox to enable the access control of the SNMP daemon manangement
Parameters (SNMP Access Table)
1)Device
•The name of the device allowed for access control
•Data type: Octet String
2)Subnet
•The subnet allowed for access control
•Data type: IP Address
3)Netmask
•The netmask for the Subnet IP above
•Data type: IP Address
4)Using
•Define the type of access control to use through, either Device or Subnet
5)Comment
•An optional comment regarding the table entry
•Data type: Display String
6)Active
•Define the status of the table entry, either active or inactive
5.3.1.32 Management > SNMP Trap
The SNMP Alarm system embedded in the Mesh AP unit can be configured through this page. The SNMP Trap Table in this page lists the SNMP Trap hosts.
PLANET Mesh Network Manager Guide | Page117 of 124 |