PLANET Mesh Network Manager Guide

•Data type: Integer, even number only, in between 1500 and 2346

•Default value is 2346

9)DTIM Interval

•Data type: Integer, in between 1 and 256

•Default value is 1

10)Data Rate

•Select the data rate of the interface from the list

•Available selection: Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps

11)TX Antenna

•The properties of the transmission antenna

•Available selection: Diversity, Port1, Port2 and Card Default

12)RX Antenna

•The properties of the reception antenna

•Available selection: Diversity, Port1, Port2 and Card Default

13)Current Tx Power (dBm)

•This is a read-only field indicating the current transmission power used by the mesh interface.

•The value is in the unit of dBm

14)Tx Power (dBm)

•The transmission power field, where user can alter the level of power through the selection available.

•The default value for this field is Max, which will use the maximum power level of the wireless interface.

15)Security

•The security type to be used by the wireless network, wither open, WEP, or AES

16)Encryption Key

•The encryption key used in corresponding to the security type used.

•Data type: Octet String

PLANET Mesh Network Manager Guide

Page79 of 124