PLANET Mesh Network Manager Guide
5.3.1.16 Services > NAT
The Network Address Translation service enables the clients with IP addresses that are not globally unique to connect to the network by translating those addresses into a globally routable IP address space.
Parameters
1)Enable NAT Service
•A checkbox to enable or disable the NAT service
Parameters (NAT Table column)
1)Protocol
•Protocol to use. Choose from UDP, TCP and Both
2)Port
•The port number to forward to.
•Data type: Integer, in the range of 1 to 65535
3)IP Address
•The destination host IP Address
•Data type: IP Address
PLANET Mesh Network Manager Guide | Page95 of 124 |