PLANET Mesh Network Manager Guide
5)Operational
•A checkbox to enable or disable the system to send the operational traps
6)Flash
•A checkbox to enable or disable the system to send the traps regarding Flash
7)TFTP
•A checkbox to enable or disable the system to send the traps regarding TFTP
8)Image
•A checkbox to enable or disable the system to send the trap regarding Image
9)Enable Trap on Authentication Failure
•A checkbox to enable or disable the trap on authentication failure
Parameters (SNMP Trap Table)
1)IP Address
•The destination IP Address of the trap receiver, to receive the trap
•Data type: IP Address
2)Community
•The community keyword of the SNMP Trap.
•Data type: Display String, default value is “public”
•MUST reenter the same community at the correspond Confirm field
3)Comment
•An optional comment regarding the table entry
•Data type: Display String
4)Active
•Define the status of the table entry, either active or inactive
PLANET Mesh Network Manager Guide | Page119 of 124 |