distance of connectivity. The following is the summary table of transmission setting, bandwidth and distance extensibility tested for AWG 24 (0.5mm) twisted-pair without noise and cross talk.

 

DIP-1

DIP-2

DIP-3

DIP-4

 

 

 

 

 

 

Mode

Channel

Rate Limit

SNR

 

 

 

 

 

OFF

CO

Interleave

50/20 Mbps

9dB

 

 

 

 

 

ON(default)

CPE

Fast

No Limit

6dB

 

 

 

 

 

●CO / CPE

▪CO (Central Office) – the Master device mode, usually the CO device will be located at the data center of ISP or enterprise to link to the backbone.

▪CPE (customer premises equipment) – the Slave device mode, usually the CPE device will be located at branch office, home or remote side as the long reach data re- ceiver. The CPE can be connect to the PC, IP Camera or Wireless Access Point and etc network devices.

●Fast and Interleave mode: (For CO Mode only)

▪Fast mode guarantees a minimum end to end latency less than 1 ms.

▪Interleaved mode provides impulse noises protection for any impulse noise with a duration less than 250 us. In- terleaved mode has a maximum end to end latency of 10m sec.

17