Figure 3-2: Connecting Standalone PC

3.2.2 Connecting Multiple PCs to an Ethernet LAN

Refer to the following procedures to setup the VC-201 to an Ethernet LAN.

1.Set the VC-201 to be CO mode or CPE mode from the DIP switch at the rear panel.

2.Power on the VC-201 by connecting its power source.

3.Power LED will illuminate.

4.Connect VDSL line from another VDSL device to VDSL port of the VC-201.

5.LNK LED will illuminate.

6.Connect telephone to the PHONE port.

7.Connect Ethernet port to Ethernet Switch (or Broadband

Router) via regular Cat. 5 cable.

22