Figure 3-3: Connecting Multiple PCs to an Ethernet LAN

 

Please refer to your Ethernet device User’s

Note

Manual for the device’s set up information.

 

 

 

3.3 Connecting VC-202

3.3.1 Connecting Standalone IP device

Refer to the following procedures to setup the VC-202 to a standalone PC.

1.Set the VC-202 to be CO mode or CPE mode from the DIP switch at the rear panel.

2.Power on the VC-202 by connecting its power source.

3.Power LED will illuminate.

4.Connect coaxial cable from another VDSL device to VDSL

BNC port of the VC-202.

23