Main menu | Submenu | Function |
|
|
| |
|
| Show the Device ID, Hardware version, | ||||
|
| |||||
| 1. Topology Information | code version, agent status, device name | ||||
|
| and device location of each switch on the | ||||
|
| stack. |
|
|
| |
1. System |
| Show detail system information | of | each | ||
| switch including their hardware, software | |||||
Information |
| |||||
2. System Information | version, system up time, system contact, | |||||
| ||||||
|
| device name, device location and system | ||||
|
| management capabilities. |
|
| ||
|
| Modify system contact, device name and | ||||
| 3. System Configuration | device location of each switch on the | ||||
|
| stack. |
|
|
| |
| 1. Network | Configure each switch’s IP address, | ||||
| Configuration | subnet mask and default gateway. |
| |||
| 2. Console Port Status | Display the console port configuration, like | ||||
| Display | baudrate, databits, parity, etc. |
|
| ||
|
| Create, modify or delete SNMP | ||||
| 3. SNMP Community | community name, the IP address | ||||
| Setup | associated with the name and the access | ||||
2. Management |
| right. Up to 5 entries are supported. |
| |||
| Create, modify or delete the community | |||||
Setup | 4. Trap Receiver Control | name, IP address and aging time of the | ||||
| trap receivers. Up to 5 receivers are | |||||
|
| |||||
|
| supported. |
|
| ||
|
| Enable or disable web, telnet and SNMP | ||||
| 5. Management | management function of the switch. | You | |||
| Features Control | can also change the http port number on | ||||
|
| this menu. |
|
| ||
| 6. Trap Filtering Setup | Define which events will trigger the trap on | ||||
| this menu. |
|
| |||
|
|
|
| |||
|
| Show the status of each ports and | ||||
3. Device Control | 1. Port Status / | configure each ports settings. | It | also | ||
allows you to configure each port’s speed, | ||||||
Configuration | ||||||
| duplex, flow control and bandwidth | |||||
|
| |||||
|
| allocation.. |
|
| ||
|
| Create, delete and display the MAC | ||||
| 2. Address Table | address | entries of each port. | You | can | |
| also modify the aging time and search a | |||||
|
| |||||
|
| specified MAC address on this menu. |
| |||
|
| Two VLAN modes are supported on this | ||||
|
| switch, 802.1Q VLAN and port group | ||||
| 3. VLAN | VLAN. | Please select the VLAN mode | |||
| first and then make further configuration. | |||||
|
| |||||
|
| Please refer to section 4.9 for detail | ||||
|
| configuration available on this switch. |
| |||
| 4. Security | This function is reserved for future use. | ||||
|
| Enable or disable the IGMP Snooping. | ||||
| 5. IGMP Snooping | You can also display the IP multicast | ||||
|
| registration table on this menu. |
|
| ||
| - 13 - |
|
|
|
| |