A denominate port can be searched by its given name (Match whole word only).

4.7 Security

This is reserved for future use.

4.8 SNMP

Simple Network Management Protocol (SNMP) is a communication protocol for managing devices on a network. It is commonly used for network administrators to communicate with multiple devices (hub, switch, router ……) for configuring and monitoring while

convenient for troubleshooting but no miscellaneous platform consideration.

The built-in SNMP is an agent, which watches the status of it self. The Network Management Station (A computer attached to network with SNMP management program well installed) can be used to access it.

Community

A valid entry of Community String and IP Address is for authentication to login to the SNMP agent for configuration. Moreover, the community capacity can up to 3 sets and only by the way of specified IP address here will be allowed to access the agent. One entry consist of IP address “0.0.0.0” will allow the ones who know the community string to access the agent (with Read-Only access right) without limitation.

To Add a community

1.Input a name as a community string for authentication in the “Community String” field (ex: administrator).

2.Enter the IP address in the “IP address” field you allow to access from (ex: 192.168.1.22)

3.Click the “Access Mode” combo box and select a authority (Read-Only / Read-Write)

4.Click <<Add button to add this entry.

To Remove a Community

1.Select the community you want to remove from the “Current” list

2.Click Remove>> button to remove it

To Modify a Community

- 25 -