Planet Technology WGSW-2403 Wiring for 10/100Mbps (Fiber Optic/Copper)

WGSW-D1ST

TX RX

100Base-FX

100Base-FX SC multi-mode fiber module

WGSW-D1S15

TX RX

100Base-FX

100Base-FX SC multi-mode fiber module

The auto-negotiation feature of the switch allows each port of the device running at one of the following operation modes:

Port	Media	Speed	Duplex Mode
10/100Mbps	100Mbps fiber optic (Alternative to	100Mbps	Full Duplex
	copper port-1)
			Half Duplex
	10/100Mbps RJ-45 (copper)	10Mbps	Full Duplex
			Half Duplex
		100Mbps	Full Duplex
			Half Duplex

All copper ports supports MDI/MDI-X automatically crossover capability that is the port can connect either the PC or hub without crossover cable adjustment.

Wiring for 10/100Mbps (Fiber Optic/Copper)

Following are the summaries of cabling required:

Media	Speed	Wiring	Maximum Distance
10/100Mbps RJ-45	10Mbps	Category 3,4,5 UTP/STP	100m
ports	100Mbps	Category 5 UTP/STP	100m
WGSW-D1SC,	100Mbps	62.5/125 or 50/125µm	2km
WGSW-D1ST		multi-mode fiber optic
WGSW-D1S15	100Mbps	9/125µm single-mode fiber optic	15km

If the port is connected but the relevant LED is dark, check the following items:

1.The switch and the connected device’s power are on or not.

2.The connecting cable is good and with correct type.

3.The cable is firmly seated in its connectors in the switch and in the associated device.

-6 -