CHAPTER 5 TROUBESHOOTING

This chapter contains information to help you solve problems. If WGSW-2403 is not functioning properly, make sure the Switch was set up according to instructions in this manual.

The port is connected but the port LED is not lit

Solution:

Check the following items:

1.The switch and the connected device’s power are on or not.

2.The connecting cable is good and with correct type.

3.The cable is firmly seated in its connectors in the switch and in the associated device.

4.The connecting device, including any network adapter is well installed and functioning.

Some stations can not talk to other stations located on the other port

Solution:

1.Check the VLAN and PVID settings.

2.The address table may contain older information than of the address table of that node. Please power down to refresh the address information.

- 38 -