Planet Technology WGSW-2403 VLAN Static Table, To add member port, To remove member port, To remove a VLAN group, To modify a VLAN group

To remove a VLAN group

1.Select a VLAN group you want to remove from the “Current” list.

2.Click Remove>> button to remove it.

Attention:

1.If a removed port is no longer belonged to any other group, it is temporarily disabled because no one can communicate with it.

2.If one port’s PVID is equal to this VLAN ID, removing this VLAN group will not allow until you change it.

To modify a VLAN group

1.Select a VLAN group you want to modify from the current list

2.Modify parameters in “New” column

3.Click Modify button to submit the new parameters

VLAN Static Table

This screen is used to Add/Remove member ports of a VLAN.

To add member port

1.Click the “VLAN ID” combo box and select a VLAN you want new ports to join in

2.Select ports (press Shift/Ctrl key for selecting multi ports) in the “Non-Member” column

3.Click <<Add button to join selected ports in

To remove member port

1.Click the “VLAN ID” combo box and select a VLAN you want to remove ports

2.Select ports (with Shift/Ctrl key to select multi ports) in the “Member” column

3.Click Remove>> button to delete selected ports

NOTE:

1.If a removed port is no longer belonged to any other group, it is temporarily disabled because no one can communicate with it.

2.The port which is assigned a PVID and the PVID is equal to VLAN ID, removing the port will not allow until you change it.

-28 -