NOTE: Also by simply clicking the port on the ‘Panel Display’, the port information screen pops up

Configuration

Port attributes can be setup in this page.

Setup Port Attributes

1.Click the “Name” column of the port. Enter a name for identification, like ‘Richard’; and press Enter

2.Leave the “Admin” column ‘Enable’ value to make the port to be in operation or ’Disable’ to pause it

3.Select Duplex mode---10Half/10Full; 100Half/100Full; ‘Auto’ for auto-negotiation and

1000Full auto-detection

4.Select ‘Enable’ to take “Flow Control” effect

5.Click Apply button to apply settings

-22 -